HomeNewsArticle Display

News Search

355 EMS

The 355 Equipment Maintenance Squadron is a unified team of five diverse maintenance flights, Aerospace Ground Equipment (AGE) Flight, Armament Flight, Fabrication Flight, Maintenance Flight, and Munitions (AMMO) Flight. We are dedicated to providing world class maintenance support for Davis-Monthan's A-10, C-130, and HH-60 aircraft.

The 355 Equipment Maintenance Squadron is a unified team of five diverse maintenance flights, Aerospace Ground Equipment (AGE) Flight, Armament Flight, Fabrication Flight, Maintenance Flight, and Munitions (AMMO) Flight. We are dedicated to providing world class maintenance support for Davis-Monthan's A-10, C-130, and HH-60 aircraft.

U.S. Air Force Airman 1st Class Donovan Timek, 355th Equipment Maintenance Squadron aircraft metals technology journeyman, is tungsten inert gas arc welding in the G6 position on Davis-Monthan Air Force Base, Ariz., Nov 27, 2012.  Airman Timek is practicing this technique to be weld certified in Air Force Metals Tech Standards. (U.S. Air Force Photo by Airman 1st Class Josh Slavin/Released)

U.S. Air Force Airman 1st Class Donovan Timek, 355th Equipment Maintenance Squadron aircraft metals technology journeyman, is tungsten inert gas arc welding in the G6 position on Davis-Monthan Air Force Base, Ariz., Nov 27, 2012. Airman Timek is practicing this technique to be weld certified in Air Force Metals Tech Standards. (U.S. Air Force Photo by Airman 1st Class Josh Slavin/Released)

U.S Air Force Airman 1st Class Donovan Timek, 355th Equipment Maintenance Squadron aircraft metals technology journeyman, is tungsten inert gas arc welding at the G6 position on Davis-Monthan Air Force Base, Ariz., Nov 27, 2012. The G6 position means that the pipe cannot be rotated; it must remain in a fixed position and angled at 45 degrees. (U.S. Air Force Photo by Airman 1st Class Josh Slavin/Released)

U.S Air Force Airman 1st Class Donovan Timek, 355th Equipment Maintenance Squadron aircraft metals technology journeyman, is tungsten inert gas arc welding at the G6 position on Davis-Monthan Air Force Base, Ariz., Nov 27, 2012. The G6 position means that the pipe cannot be rotated; it must remain in a fixed position and angled at 45 degrees. (U.S. Air Force Photo by Airman 1st Class Josh Slavin/Released)

U.S  Air Force Airman 1st Class Donovan Timek,  355th Equipment Maintenance Squadron aircraft metals technology apprentice, lights an oxy acetylene torch as he prepares to flame harden a locally manufactured tool on Davis-Monthan Air Force Base, Ariz., Nov 27, 2012. (U.S. Air Force Photo by Airman 1st Class Josh Slavin/Released)

U.S Air Force Airman 1st Class Donovan Timek, 355th Equipment Maintenance Squadron aircraft metals technology apprentice, lights an oxy acetylene torch as he prepares to flame harden a locally manufactured tool on Davis-Monthan Air Force Base, Ariz., Nov 27, 2012. (U.S. Air Force Photo by Airman 1st Class Josh Slavin/Released)

U.S. Air Force Airman 1st Class Donovan Timek, 355th Equipment Maintenance Squadron aircraft metals technology journeyman, turns a piece of stainless steel on a lathe on Davis-Monthan Air Force Base, Ariz., Nov 27, 2012. The Lathe can accurately get you within a thousandth of an inch of your final measurement; this is good for making a bushing. (U.S. Air Force Photo by Airman 1st Class Josh Slavin/Released)

U.S. Air Force Airman 1st Class Donovan Timek, 355th Equipment Maintenance Squadron aircraft metals technology journeyman, turns a piece of stainless steel on a lathe on Davis-Monthan Air Force Base, Ariz., Nov 27, 2012. The Lathe can accurately get you within a thousandth of an inch of your final measurement; this is good for making a bushing. (U.S. Air Force Photo by Airman 1st Class Josh Slavin/Released)

U.S. Air Force Airman 1st Class Donovan Timek, 355th Equipment Maintenance Squadron aircraft metals technology journeyman, tightens a cemented carbide lathe tool bit in its holder on Davis-Monthan Air Force Base, Nov 27, 2012. Tightening the bit ensures it will properly turn the metal on the lathe. (U.S. Air Force Photo by Airman 1st Class Josh Slavin/Released)

U.S. Air Force Airman 1st Class Donovan Timek, 355th Equipment Maintenance Squadron aircraft metals technology journeyman, tightens a cemented carbide lathe tool bit in its holder on Davis-Monthan Air Force Base, Nov 27, 2012. Tightening the bit ensures it will properly turn the metal on the lathe. (U.S. Air Force Photo by Airman 1st Class Josh Slavin/Released)

U.S. Air Force Airman 1st Class Donovan Timek, 355th Equipment Maintenance Squadron aircraft metals technology journeyman, is pocket milling on Davis-Monthan Air Force Base, Ariz., Nov 29, 2012. Pocket milling is removing all the material inside some arbitrary closed boundary on a flat surface of a work piece to a fixed depth (U.S. Air Force Photo by Airman 1st Class Josh Slavin/Released)

U.S. Air Force Airman 1st Class Donovan Timek, 355th Equipment Maintenance Squadron aircraft metals technology journeyman, is pocket milling on Davis-Monthan Air Force Base, Ariz., Nov 29, 2012. Pocket milling is removing all the material inside some arbitrary closed boundary on a flat surface of a work piece to a fixed depth (U.S. Air Force Photo by Airman 1st Class Josh Slavin/Released)

Social Media